iSee route-based Condition Monitoring software
iSee software was built to monitor the health condition of your important machines.
It is easy to use, yet powerful. Easily build a database of your machines and create routes for data collection of monitored parameters,
know about the alarm status to prevent from costly unscheduled shutdown and conduct fault analysis when necessary.
iSee software consists of 3 modes: Database, Route, Plot and Report mode.
Coupled with VP5, MP5 or vPod Pro data collectors, iSee provides you a complete solution for you daily Predictive Maintenance projects.
VP5 MP5 vPod Pro
By using the True-Peak detection technology and Envelope Spectrum measurements, iSee helps you to find out the bearing faults at its early stage.
It is easy to generate custom reports by some simple steps. You can select to print out the trend charts or spectrum charts by selecting the options.
iSee software coupled with the VP5, MP5 or vPod Pro data collectors is a powerful solution to the management of your machine's health condition. With iSee, you will easily build up a database for managing the archive data of your machines, so as to prevent from unscheduled shut-down and save on maintenance cost.
With iSee, you can monitor the bearing and gear conditions effectively by the True Peak detection of high frequency spike signals. iSee supports fault frequency display on the spectral plots and advanced band alarm analysis which can monitor specified machine problems.
- Display Fault frequencies on the spectral plots for easy vibration diagnosis
- Complete database of bearing fault frequencies (optional)
- Manage alarm settings with alarm category
- Effective alarm status analysis with both overall and band alarm
- Automatic Reports with iSee allow you to build a custom report for simple one click reports
- Trending plots with linked diaplay of corresponding spectral plots.
- Easy to setup database with templates
Database mode: In this mode, you can create a database for the machines you are going to monitor, setup the monitored parameters for each point, create measurement routes and use them for data collection in the field, define the alarm status, fault frequency tables and more.
Monitored parameters: For each monitored point, iSee allows you to select the desired vibration parameters and functions including: bearing condition values, various overall values, time waveforms, envelope spectrums, cepstrum, and up to 6 independent power spectrums.
Alarm setup and management: To create an alarm setting, first create the alarm setting for the “alarm category.” This function is easily copied to similar machines saving key-in time at the point level. To make a change in alarm level, select the category level to make the change and all associated points will be changed, saving time.
Fault frequency table: Create pre-defined fault frequencies from a database or user-entered parameters such as multiples of the rotation frequency, inner race, outer race frequencies of bearings and more. The display of the fault frequencies on spectral plot makes your vibration analysis convenient and simple.
Route Mode: Create routes from selected nodes of the database, download routes to a data collector for collecting measured parameters in the field, and upload the archive data back to the database for further analysis.
Plot mode: Diagnose and analyze machinery root causes. View live or historical spectral and time waveform plots, synchronize your cursor across multiple spectral or time waveform plots to easily view trend data. Enable alarm levels, fault frequencies and other diagnostic functions with a simple click of an icon and more.
Report mode: In the report mode, generate custom reports with selected formats and custom options with the built-in report setup wizard.