Products

Vibration data collectors and Analyzers

vPod Pro Smart Vibration Meter

<-- This is new lazy loading method-->
vPod Pro Smart Vibration Meter for Predictive Maintenance
Route-based vibration data collector with dual-output sensor
Overall vibration measurement from vibration data collector
Bearing Condition Monitoring for Predictive Maintenance
Bluetooth headset connection on vibration data collector
Camera function on portable data collector
Smart Vibration Meter with Spectrum Analysis
Route-based Vibration Data Collector

The vPod Pro Smart Vibration Meter is designed for machine health monitoring and predictive maintenance.
• IP65-rated case with anti-drop rubber sleeve
• 3.5" color screen
• Built-in 24G flash memory
• Route-based vibration data collector measures bearing condition and temperature at the same time
• Optional spectrum analysis function
Buit-in camera for taking on-site photos as a note when storing data 
• Supports Bluetooth headset connection for listening to the vibration signal
• USB 2.0 and Wi-Fi transmission interface 
Innovatively designed dual-output sensor A52-IR (patent pending)
• Measure vibration signals in the frequency range of 1~8kHz  
High-strength magnetic base to secure the transmission of high-frequency signals
• Infrared temperature sensor 
Overall vibration measurement
Detect low-frequency vibration of rotating equipment, such as
• Dynamic balance problems with the rotating parts
• Shaft misalignment
• Looseness  
The vPod Pro Smart Vibration Meter's built-in ISO 10816-3 vibration standard displays vibration severity ​​in green, yellow, and red.
Bearing Condition Monitoring
• Measures the bearing signal in the 1 kHz to 10 kHz bandwidth
• Implements the "true peak" value for detecting bearing damage
• Detects and tracks the bearing condition for early damage detection and predictive maintenance
• Detects bearing condition effectively on ultra-low speed machines
• Shows bearing condtions in green, yellow, and red background

Bluetooth headset connection 

• The vPod Pro Smart Vibration Meter has a built-in feature that connects to Bluetooth headsets
• After each measurement, the user can automatically play 2~8 seconds of vibration signal through the Bluetooth headset
• Experienced users can use this auxiliary function to tell whether an equipment is abnormal or not

Camera function

• The vPod Pro Smart Vibration Meter has a built-in camera
• Can be attached to a live shot as a record while storing measurement data
• Photo linked to the measurement data and sent back to the PC-based iSee Predictive Maintenance Software

Spectrum analysis function (optional)

• Spectrum data is measured at the same time as a diagnostic vibration problem
• Select 1 kHz bandwidth of 1600 resolution lines or 10 kHz bandwidth of 6400 resolution lines

Route-based Vibration Data Collector Module (optional)

• Works with iSee Predictive Maintenance Software
• Measures basic vibration, bearing condition, temperature, and raw vibration signal
• Converts raw signal into a time waveform, two sets of spectrum analysis, envelope spectrum, and cepstrum
• Quickly track problematic measurement points, trend changes, diagnose problems and generate reports

 

 

vPod Pro - Smart vibration meter/vibration analyzer/data collector

Download the vPod Pro Smart Vibration Meter brochure


vPod Pro smart vibration meter for predictive maintenance compares to fluke 805 vibration meter     vPod Pro handheld vibration analyzer for predictive maintenance compares to skf advisor     vPod Pro portable vibration analyzer


The vPod Pro Smart Vibration Meter is 

● IP65 rated dustproof and waterproof case with anti-drop rubber sleeve
● Equipped with a 3.5" color screen for intuitive and easy-to-understand operation interface
● Built-in 24G flash memory provides sufficient storage space
● Innovative sensor allows measurement of vibration values, bearing condition, and temperature at the same time
● Optional Spectrum Analysis Module and Route-based Vibration Data Collector Module  
● A camera on the back allows you to add a photo taken on-site as a note when storing data
● Supports Bluetooth headset connection for listening to the vibration signal
● USB 2.0 and Wi-Fi transmission interface to transfer data to a PC.




Introduction to vPod Pro Smart Vibration Meter


Basic operations of the vPod Pro Smart Vibration Meter


Working with vPod Pro's Route-based Vibration Data Collector Module and iSee Predictive Maintenance Software