Products

Vibration data collectors and Analyzers

vPod Vibration Meter

<-- This is new lazy loading method-->
vPod Lite Smart Vibration Meter
vPod bearing tester for early detection of bearing failure
vPod II Smart Vibration Meter and route-based vibration data collector
Complete vPod Vibration Meter Series

vPod Lite is a microprocessor based smart vibration meter
• Measure vibration levels in acceleration, velocity, and displacement
• User-selectable vibration units and detection (rms, peak, peak-peak)
• Display vibration unit and detction on the LCD screen
• Automatically detect and display sensor and cable status with an icon
• Turn on screen back light in dark environment
• Display battery indicator on the screen
• Adjustable sensor sensitivity when the sensor is changed
• Up to 36 hours continuous operation with a 9V battery
• IP65-rated housing
• CE mark 
 

Compared with vPod Lite, vPod vibration meter has additional features as follows:

• A high-pass filtered acceleration level bearing tester

• Precision mode for resolution of 0.1 micro-meter
• Measure averaged data, peak-hold data, or freeze the display

 

vPod II route-based vibration data collector

• Stores up to 1000 points of vibration data
• Vibration data can be transferred to a PC via the USB connection

A complete vPod vibration meter kit comes with

• A hard carrying case
• A high quality IEPE accelerometer
A coiled cable
• A magnetic base
• A probe tip
• A soft carrying case
• An user manual
• PC software for data transfer and a USB cable (for vPod II)
 

 

 

vPod Smart Vibration Meter Series

The microprocessor-powered by vPod family of vibration meters can easily measure average, hold or peak hold vibration data, and display them with user-selectable unit/detection. The battery charge indicator and sensor bias indicator are also standard feature.

For precision machines that have very low vibration levels, a precision reading is necessary. In addition to an extra quiet accelerometer - that is supplied as a standard accessory - a built-in gain circuit amplifies low-level vibration signals and show readings in precision mode when you turn the gain mode on. This one button gain function allows the user to increase precision by one decimal point.

The vPod vibration meters can measure vibration levels in acceleration, velocity or displacement. The user-selected display presents the vibration data in their preferable units and detections. The vPod vibration meters come standard with a built-in 500 Hz high pass filter. This is significant because most roller element bearings' parts are located between 500 Hz - 2 kHz. This high pass filter is a proven bearing tester method for early detection of bearing failure.

 
SMD (surface mount) production

● Battery charge indicator
● Input bias indicator
● Backlit high-resolution LCD display
● Average, Peak hold, and freeze modes
● Selectable gain
● Bearing tester for early detection of bearing failure