Products

Vibration data collectors and Analyzers

vPod Pro Smart Vibration Meter/Analyzer/Data Collector

<-- This is new lazy loading method-->
vPod Pro smart vibration meter, route based data collector, handheld vibration analyzer, IPT 9070, Fluke 805, adash a4900, skf machine condition advisor, vibration pen, temperature, bearing condition,
A52-IR dual output sensor measuring vibration and temperature at the same time
vPod Pro Smart Vibration Meter/handheld vibration Analyzer/Data Collector, vibration pen
damaged bearing detection with true peak detection, Fluke 805, PeakVue, Envelope spectrum, low speed machine
vPod Pro smart vibration meter: listen to vibration signal via Bluetooth headset
vPod Pro smart vibration camera function
vPod Pro portable vibration analyzer, handheld vibration analyzer
vPod Pro route based data collector, IPT 9070, Fluke 805, adash a4900, skf machine condition advisor

The vPod Pro smart vibration meter is built by innovation designs to meet your requirements of machine health monitoring.

- IP65 rated case with anti-drop rubber sleeve;
- Equipped with 3.5-inch color screen;
- Built-in 24G flash memory;
- Measure vibration values, bearing condition and temperature at the same time;
- Optional spectrum analysis function;
- Route-based measurement

- The built-in camera for taking on-site photos as a note when storing data. 
- Supports Bluetooth headset connection for listening to the vibration signal
- USB 2.0 and wifi transmission interface
Innovatively designed dual output sensor A52-IR (patent pending)
- Measure vibration signal in the frequency range of 1~8kHz.  
- Use a high-strength magnetic base to secure the  transmission of high-frequency signals
- An infrared temperature sensor is arranged under the sensor 
Overall vibration measurement
The overall vibration level is a basic vibration measurement used to detect low-frequency vibration of rotating equipment.
For example; measure dynamic balance problems with the rotating parts, shaft misalignment, looseness problems and others can be detected by using this method.  
The vPod Pro’s built-in ISO 10816-3 vibration standard displays the vibration severity ​​in green, yellow and red colors
Bearing condition detection
> Measures the bearing signal in the 1 kHz to 10 kHz bandwidth
> Implements the "true peak" value for detecting bearing damage.

> Detects and tracks the early damage phase of bearing problems.
> Detects bearing failure effectively on ultra low speed machines.
> Shows bearing condtions in green, yellow and red background.

Bluetooth headset connection 

vPod Pro has a built-in Bluetooth feature that can be connected to Bluetooth headsets.
After each measurement, the user can have the vPod Pro automatically play 2~8 seconds of vibration signal through the Bluetooth headset.
Experienced users can use this auxiliary function to tell whether an equipment is abnormal or not.

Camera function

The vPod Pro built-in camera on the back. It can also be attached to a live shot as a record while storing measurement data.
This photo will be linked to the measurement data and sent back to the PC as an attachment to the data review.

Spectrum analysis function (optional)

In addition to measuring the overall value of vibration, bearing condition and temperature, the spectrum data is also measured at the same time as a diagnostic vibration problem.
The measured spectrum can be selected from 1 kHz bandwidth of 1600 resolution lines or 10 kHz bandwidth of 6400 resolution lines.

Route-based measurement function (optional)

- Works with iSee route based condition monitoring software
- Measures basic vibration, bearing condition, temperature and raw vibration signal. 
- Converts raw signal into a time waveform, two sets of spectrum analysis, envelope spectrum, and cepstrum
- Quickly track problematic measurement points, trend changes, problem diagnosis and generating reports.

 


 vPod Pro - Smart vibration meter/vibration analyzer/data collector

Download brochure here


vPod Pro smart vibration meter, bearing failure, vibration data collector, adash a4900, tpi 9070, fluke 805, skf advisor, predictive maintenance     vPod Pro handheld vibration analyzer, smart vibration meter, route based data collector, adash a4900, tpi 9070, fluke 805, skf advisor     vPod Pro smart vibration meter, bearing failure, vibration data collector, adash a4900, tpi 9070, fluke 805, skf advisor, predictive maintenance

- IP65 rated dustproof and waterproof case with anti-drop rubber sleeve;
- Equipped with 3.5-inch color screen for intuitive and easy-to-understand operation interface;
- Built-in 24G flash memory provides sufficient storage space;
- Innovative sensor allows you to measure vibration values, bearing condition and temperature at the same time;
- Optional spectrum analysis function and route-based measurement function for a large amount of data collection.  
- The camera on the back allows you to add a photo taken on-site as a note when storing data. 
- Supports Bluetooth headset connection for listening to the vibration signal
- USB 2.0 and wifi transmission interface to transfer data with a PC.





Introduction to vPod Pro smart vibration meter



Basic operations of vPod Pro



Working with vPod Pro's Route Mode and iSee software