Products

Portable Sound & Vibration Analyzers

fieldpaq II Vibration Tester

<-- This is new lazy loading method-->
Fieldpaq II vibration meter and portable vibration analyzer
vibration meter Data acquisition connectors
portable vibration analyzer with External memory card and USB interface
Vibration tester with FFT Spectrum Analysis
portable vibration analyzer with field Rotor Balancing capability
Vibration Meter for bearing damage
portable vibration analyzer with Octave Spectrum Analysis

Fieldpaq II vibration tester and portable vibration analyzer  
● Ruggedized housing, IP65 rating
● 5-inch color (800 x 480 high resolution) touch screen  
● Powered by Microsoft's WinCE
● Acquires measurement signal with 24-bit sigma delta AD converters
 Up to 40 kHz maximum bandwidth
 Powered by a DSP chip for real-time analysis

Data acquisition connectors
● Two BNC connectors for 2-channel measurements.  
 LEMO 4-pin connector to extend to 4 channels 
 AUX channel for tachometer signal input and power supply

External memory card and USB interface
● Store vibration data on the SD card
● USB connection to transferred to a PC

Optional 2- or 4-channel FFT Spectrum Analysis Module
Measures time waveform, orbit, power spectrum, cross power spectrum, complex spectrum, FRF, coherence, PSD and envelope spectrum


 General vibration analysis
 Modal testing
 Sound intensity measurement
 Operational deflection shape (ODS) measurement
 Bearing damage diagnosis
Rotor Balancing Module
The fieldpaq II Vibration Tester's optional field balancing software package supports simultaneous, 4-channel data acquisition with a multiple-point balancing technique. 
By conducting coast-down measurements for 1X vibration, the heavy spot can be easily identified with only one measurement saving you time and money while improving safety.  
Vibration Meter Module (optional)
● Measure overall vibration levels in displacement, velocity and acceleration
● Measure Crest factor for detecting bearing damage and failure
● Continuous recording over time or RPM

Octave Spectrum Analysis
● Real-time digital filtering technology to generate octave, 1/3 octave or 1/12 octave spectrum
 Vibration analysis with the special weighting of ISO 6954, ISO8041, ISO2631 and more
 Floor vibration measurements providing real-time evaluation of the vibration severity

 

 

Fieldapaq II Vibration Tester


The fieldpaq II Vibration Tester is a portable, 4-channel, real-time analyzer that is built for advanced noise and vibration measurements in the field. For vibration data acquisition in challenging environments, Fieldpaq II is manufactured with a ruggedized housing, made by a dual injection molding process, and protective sealing to provide an IP65 rating.  


fieldpaq II portable sound and vibration analyzer    fieldpaq II portable balancing analyzerfieldpaq II portable analyzer with SD card reader  fieldpaq II portable dynamic signal analyzer

 Large 5", color, high resolution (800 x 480) touch screen.  
 Powered by Microsoft's WinCE
 Precision 24-bit sigma delta AD converters
 Up to 40 kHz maximum bandwidth.  
 DSP chip performing real-time analysis
 IP65-rated rugged, high quality housing made by dual injection process


FFT Spectrum Analysis Module


The fieldpaq II Vibration Tester's 2- or 4-channel optional FFT Spectrum Analysis Module allows you to conduct cross-channel analysis such as FRF, coherence, and cross power spectrum, as required for modal analysis, ODS testing or sound intensity measurements. It also supports continuous spectral measurements and waterfall display for vibration testing of varying-speed machines.

● General vibration analysis
 Modal testing
 Sound intensity measurement
 Operational deflection shape measurement
 Bearing diagnosis

 
With the FFT Spectrum Analysis Module, the fieldpaq II portable vibration analyzer also supports bearing vibration analysis as a standard feature. By taking advantage of demodulation technology, one may see the fault frequencies on a demodulated spectrum to detect early bearing damage.  

fieldpaq II vibration tester with bearing damage monitoring     fieldpaq II vibration tester with waterfall and intensity plots   fieldpaq II Portable vibration analyzer with early bearing damage detection

 

Octave Spectrum Analysis Module


The optional Octave Spectrum Analysis Module utilizes real-time digital filtering technology to generate octave, 1/3 octave or 1/12 octave spectrum. Conforming to the IEC 61260 & IEC 61672 standards, the Octave Spectrum Analysis Module is suited for acoustic or vibration data acquisition in the field. For vibration applications, the program can perform measurements with user-defined weightings. For example, the fieldpaq II Vibration Tester can perform measurements with the specified weighting of ISO 6954, ISO8041, ISO2631 and more. When measuring floor vibration, the fieldpaq II portable vibration analyzer can display the VC curves on the spectrum, providing real-time evaluation of the vibration severity in the field.

portable vibration analyzer for floor vibration monitoring   portable vibration analyzer generates 1/12 octave measurements   fieldpaq II portable sound and vibration analyzer with octave spectrum
 

Rotor Balancing Module


The fieldpaq II Vibraiton Tester's Rotor Balancing Module supports simultaneous, 4-channel measurements with a multiple point field balancing technique. Now with multiple-point balancing, vibration is minimized in BOTH horizontal and vertical directions at the same time. By enabling coast-down measurements for 1X vibration, the heavy spot is identified correctly with only one measurement, saving you time and money by eliminating the use of trial weights. It also eliminates safety concerns from placing the trial weights in the wrong location. 

Other field balancing features and functions are:

 Multi-point balancing
 Component calculation
 Drill depth calculation
 Allowable residual unbalance calculated from the ISO 1940 standard
 Unequal radii calculation
 Decoupled balancing (couple + static)
 Review historical vibration data on a polar plot
 Review historical balancing data on a polar plot
 Heavy spot estimation with one shot measurement
 Redo a previous balancing job with saved balancing factors
● Continue an unfinished field balancing job from a saved file


fieldpaq II portable vibration analyzer with multiple point field balancing   filedpaq II portable vibration analyzer for field balancing with heavy spot detection   fieldpaq II vibration tester for field balancing displays mass polar plot per ISO 1940 standard   fieldpaq II portable vibration tester for data acquisition and field balancing
 

Vibration Meter


Overall vibration level is a basic parameter for determining a machine’s operational condition. By simulating the operation of an analog vibration meter, fieldpaq II performs time domain integration, filtering, and root mean square (RMS) calculations, for accurate measurements of vibration levels. One to four channels can be measured at the same time, displaying the results to a trend chart, bar chart, or continuously recorded to a data file. Easily check vibration severity against the built-in ISO 10816-3 standard.
 
fieldpaq II portable vibration meter module displaying bar chart   fieldpaq II portable vibration meter module displaying trend chart